The Amino A140 set-top box (STB) supports multiple output resolutions
and options related to output resolution.
The A140 has an output scaler that can be configured to scale to
Standard Definition, 576p, 720p, 1080i or 1080p, or the STB can pass
thr...
The ARQStream includes the unique ability to dynamically change the
video encoding bitrate. This is achieved in a seamless way without
causing a glitch on the decoder output.
We have an HTTP API designed to allow 3rd party equipment to update
the t...
Speed (baud): 115,200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None
Capture MPEGTS Stream using VLC
Please follow the steps bellow to capute a unicast of multicast
MPEGTS stream.
1. Click on media
2. Scroll down to conert/save and click
3. Select the network tab
4. Type in the multicast/unicast addre...
Haivision Makito 2.0 Upgrade
PLEASE NOTE
* There is no downgrade path from the 2.0 encoder firmware.
* The upgrade procedure may take up to 2 hours
PRE REQUISITES:
* Makito Encoder running firmware version 1.5.3/1.5.4
* The Following f...
The Techex ARQStream encoder/decoder appliance is configured to, by
default, expect an SDI (or HD-SDI/3G-SDI) input with embedded audio,
as most sources used for encoding will output an SDI bit stream with
audio, even when no audio is present. This pro...
Many support cases result in requests for additional information from
the customer for diagnosis, which can cause delays in providing
support. Please provide as much information concerning your problem as
possible when submitting a support case. This info...
Download "autorun" and copy it to a USB flash stick and plug into the
arqStream you wish to reset.
Power cycle the arqStream and it will come back up on the following
IP:
IP address: 10.12.5.50
Subnet mask: 255.255.255.0
Default gateway: 10.12.5....
As satellite positions and frequencies are subject to change at any
time, the included satellite scan data on the Haivision Torpedo DVB-S
gateway may not be up-to-date.
If the frequency you require is not found on an automatic scan you
can manually ...
